Inorganic Molecular Electride Mg4O3: Structure,Bonding, and Nonlinear Optical Properties

Growing demands of material science and, in particular, in the field of nonlinear optics (NLO) encourage us to look for stable highly polarizable molecules with excess diffuse electrons. An unusual class of compounds called electrides comply with these requirements. Many attempts have been made, yet only few electrides have been synthesized as solids and none of them as molecular species. In this paper, a new theoretically designed molecular species with electride characteristics is reported. The idea of this molecular electride comes from the formation of electride-like features in the MgO crystal with defect F-centers. The geometry of the investigated molecule can be described as a Mg₄O₄ cube with one oxygen atom removed. In Mg₄O₃, two 3s electrons are pushed out from the inner area of the molecule forming a diffuse electride multicentered bond. Our calculations show that this electride-like cluster possesses a noticeably large first hyperpolarizability β=5733 au. At the same time, a complete cube Mg₄O₄ and Mg₄O₃²⁺ without electride electron pair have much smaller β: 0 au and 741 au, respectively. This fact indicates the decisive role of the electride electron pair in NLO properties. Additionally, vertical detachment energies of isomers (VDE), excitation energies ΔE, polarizabilities α, and IR spectra were calculated. These properties, including β, are supposed to be observable experimentally and can serve as indirect evidence of the stable molecular electride formation.     

A Switch in the Hydrophobic/Hydrophilic Gas-Adsorption Character of Prussian Blue Analogues: An Affinity Control for Smart Gas Sorption

Porous coordination polymers are molecule-based materials presenting a high degree of tunability, which offer many advantages for targeted applications over conventional inorganic materials. This work demonstrates that the hydrophilic/hydrophobic character of Prussian blue analogues having a lipophilic feature may be tuned to optimize the gas adsorption properties. The role of the coordinatively unsaturated metal sites is emphasized through a combination of theoretical and experimental study of water, ethanol, and n-hexane adsorption.     

Fused vs. spiro: Kinetic,not thermodynamic preference may direct the reaction of α-carbonyl oxonium ylides

Rh(II)-catalyzed decomposition of certain cyclic α-diazocarbonyl compounds in the presence of cyclic ethers has been shown to give bicyclic ring expansion products. These are thought to arise from a [1,4]-alkyl shift toward the carbonyl oxygen atom and are in contrast with the recently observed spirocyclic products of a Stevens-type [1,2]-alkyl shift within the postulated oxonium ylide intermediate. Quantum chemical calculations performed at the B3LYP/6-31G* level of theory showed that the former reaction pathway (toward fused bicycles) is kinetically preferred.     

聚乙烯吡咯烷酮对油中酚类物质的吸附性能

煤焦油中酚类物质的有效分离,可实现其高附加值利用。针对酚类物质的分离,本研究采用聚乙烯吡咯烷酮(PVP)为吸附剂,研究了其对模型油中邻甲酚、间甲酚、对甲酚、1-萘酚和2-萘酚等的吸附性能。研究发现,PVP对酚类物质具有较大的吸附容量,其中对间甲酚、对甲酚、1-萘酚和2-萘酚的最大吸附量均可达1000 mg/g以上。同时发现,PVP上的Lewis碱性位点(C=O和C-N)可与酚羟基之间形成氢键作用,该作用的强度受酚类物质空间位阻影响。PVP具有一定的吸附选择性,在苯并呋喃或喹啉存在下,依然能够有效吸附2-萘酚。此外,使用过的PVP可再生并重复利用,同时实现酚的回收。可见,PVP是一种可用于分离煤焦油中酚类物质的优良吸附剂。     

煤直接液化油中混合酚的分离研究

利用分子筛择形特点，对煤直接液化油中的混合酚实施高效分离。本研究选取间甲酚和对甲酚作为分离煤直接液化油馏分段混合酚的模型化合物，采用化学液相沉积法对HZSM-5吸附剂的孔口结构进行改变，分析分子筛硅铝比及颗粒粒径对模型化合物间甲酚和对甲酚吸附分离性能的影响，以获得高性能固相吸附剂，并将其应用于180-190℃馏分段混合酚分离。结果表明，当分子筛硅铝比为25、粒径为3-5 μm时，分子筛的孔口结构调节效果最优；当正硅酸乙酯的最小用量为0.2 mL/g时，固相吸附剂的吸附量为0.03 g/g，对甲酚选择性高于95%。由于外表面沉积物对吸附剂的孔口结构变化，导致对甲酚选择性的提高。进一步采用HZSM-5（1）吸附剂对真实煤直接液化油混合酚的分离中发现，苯酚和对甲酚的选择性均达到100%。     

硼原子掺杂对碳纳米管吸附Ne原子影响的第一性原理计算

采用基于第一性原理的密度泛函理论（DFT）和局域密度近似（LDA）方法，优化计算得到碳纳米管（CNT），硼原子取代碳原子及其吸附氖原子前后系统的几何结构，能量，电子能带和态密度。结果显示，碳纳米管的能带结构与石墨的层状几何结构相似，能量的变化只在kz=0和kz=0.5平面之间沿着c轴方向出现。B原子取代C原子使价带和导带分别分裂为两个和三个能带。对Ne原子的吸附使价带能量沿着c轴方向升高并导致Fermi面附近的态密度下降。Ne原子的吸附在谷位H最稳定，顶位A其次。C-C间σ键的弯曲使Ne原子吸附在桥位b1比桥位b2处更为稳定。Ne原子在管外的吸附均为放热过程，而管内则为吸热过程。结构分析表明Ne原子对C原子有排斥作用，对B原子却具有吸引作用。B原子取代C原子的位置略凸出于CNT的管壁之外，使Ne原子的吸附能增加。     

介绍一个与材料相关的研究型综合化学实验——壳聚糖的制备与表征

在中国科学技术大学夏季学期的研究型实验课程"化学科研基础训练"中开设"壳聚糖的制备与表征"综合实验,以龙虾壳为原料,通过除蛋白、脱盐、脱色、脱乙酰等一系列反应,制备得到目标产物壳聚糖。运用红外光谱、核磁共振仪、黏度法、滴定等对产品的结构及性能进行表征。     

Microporous Hypercross-linked Conjugated Quinonoid Chromophores of Anthracene: Novel Polymers for CO2 Adsorption

Microporous hypercross-linked conjugated quinonoid chromophores represent a novel class of amorphous polymers, synthesized by the reaction of anthracene with dimethoxy methane in the presence of FeCl3 catalyst. Their N2 adsorption isotherms confirm their microporous nature. Diffuse reflectance UV-Visible(DRS UV-Vis) spectroscopy confirms their matrix built with the conjugated quinonoids by their broad light absorption characteristics extending from 1000 nm to 200 nm with the absorbance maximum close to 400 nm. The catalyst cross-linked anthracene with ―CH2― bridges and subsequently dehydrogenating them to form quinonoids. Their Fourier transform infrared(FTIR) spectra showed their characteristic quinonoid vibrations between 1600 and 1700 cm-1. The synthesis of polymers was carried out at 30, 40, 50, 60, 70 and 80 ℃, but the quinonoid content of the polymer obtained at 80 ℃ was higher than that of the others. Their scanning electron microscopy(SEM) images showed microspheres of 1 to 5 μm size built with tiny particles. Their surfaces were not smooth. The polymer synthesized at 80 ℃ showed 5.1 wt% CO2 sorption at 25 ℃ and 0.1 MPa, but when it was recross-linked, the CO2 sorption increased to 8 wt%. Hence, hypercross-linked conjugated quinonoid chromophores of anthracene are good for sorption of CO2.